Moving right along, next step for the farm pond seemed to be putting in the fence posts. Used the "design" drawing to help locate the post holes through the paper -- after cutting out a hole for the pond so the cattails didn't get messed up!?! Used the scratch awl, which is much easier than a post hole digger.
When the "far side" was fenced in, several fence posts were left on purpose for the farm pond. After adjusting the height by cutting off about 3/16", used white glue to hold the posts in place.
Even installed a few angled posts at the corners. Still need a gate for the tall posts near the stall!
No comments:
Post a Comment