Having demonstrated the layout/track "concept", it was time to do some permanent work. So, an edge of Watson Bayou was cut out of the pink foam along with a circular aeration pond. Then applied foamboard glue to the backside and placed on top of bench. Needed to remove bolts holding one leg to corner of bench to allow luaun and pink foam to rest against 1X4" frame! Used a few clamps to hold foamboard in place while glue dried.
Appears like either foam or frame is not square/straight . . . probably frame. May just take a little sanding or a "hot knife" to even things just this side of Watson Bayou!
No comments:
Post a Comment