A Reversing Wye?!

 Now planning a 2' X 8' addition that will focus on a compressed pulp and paper mill site.  Track design is not fixed for the moment, but it looks like there may be an option for a reversing wye, of sorts.  Still working on it. . . . 

A Year Later. . .

Wow, has it really been almost a year since the last post?  Oh, well, a little activity today to place a load of pulpwood on a pulpwood rack.

A buddy in the hobby found a pulpwood load at a local swap meet and picked it up for me.  He said I could have it for an arm and a leg, so I jumped right on it. . . .

One problem was that it was too long for the pulpwood rack I wanted to use.

A little time on the bench sander and we got a fit.

The ends of the pulpwood bolts seemed a bit yellow compared to other sticks of pulpwood I had around so I tried mixing fawn, licorice, and sunny yellow acrylic paint with a little bit of water to get a wash.  

Since each brushful required a little more mixing, the color is not uniform on the pulpwood -- probably a good thing!

For the moment, I'm very satisfied.  Looks good on the layout but now I think all of the pulpwood ends could be lightened up a little.

Cola Train Show

Took a couple of buddies with me to the Train Show in Columbia, SC -- nothing big or fancy although we were all surprised at the amount of Lionel equipment there.

My goal was to look for pulpwood racks.  After a couple of hours, nothing had shown up, but I did purchase a couple of pre-1956 cars -- Rocket Oldsmobile and "flamed" 49 Merc.  Figured the cotton broker might have an Olds but the greaser would probably be more likely to have the Mercury, unless maybe it's just somebody visiting.

 

Took a couple of packages to the car from one of the guys and upon reentering, found an L&N rack at the table just inside the door and a partly constructed Southern rack kit a couple of tables down!

Already had one L&N so will have to do some renumbering when time allows.

Cotton Broker's Office Change of Face

On February 25, 2016, a posting suggested replicating a Cotton Broker's office on the Black Top Crossing layout. . . which was done.  At the time, the future of the actual building in downtown Rock Hill was unknown; might even be torn down.  Well, no such thing:

Exterior hasn't changed much.

Opening January 28, 2022, the Cotton Broker's office will be selling Rum distilled onsite!!

Cracks at KPSL

 As noted in previous post, the crack between Sections 2 & 3 of the Knowledge Park Shortline needs a little attention.  Made some effort today with poster board, spackling, paint, ground foam, and a few ties.  Could not get the diluted white glue bottle open so painted on some super strength hair "spray" and used a plastic spoon to distribute some "grass".  May want to come back with diluted white glue at some point and also need to insert the warehouse spur rails into the connectors.  But the layout was left with all trains running!

Before (but with wet white glue on fence)

During (with poster board being installe)

After

In action

N Scale Maintenance!

Wow, N Scale is REALLY small.  Lots of water under the bridge and over the dam since the last post.  Significant issues with what must have been a short in the two new sections.  The two straight tracks for the two new sections are now working pretty well.  Disconnected the two tracks from each other, totally, which may have helped.  But to make things "look" like they are connected, installed a straight section between two turnouts just short of the turnouts.  Also, installed a short portion of "chain-link" fence to connect between Sections 2 and 3.

Two "before" shots -- may have to do a little filling of the cracks at some point.

Have to look close at this "after" photo to see the fence just to the right of the partition.

OMG

 Oh my gosh, this guy does great work!  So, while the green loco ran well for a little while, it has slowed down again.  More repairs.  But check this out:

The third section of the Knowledge Park Shortline Railway is complete!

This will finish the model of Knowledge Park as it was in 1953 plus a major portion of downtown Rock Hill, SC.  I wondered why Jim had so many cars on this section of the layout when he had mentioned how tedious it is to make and paint the vehicles.  He explained that it was afternoon shift change and the cars were leaving and entering the too-small parking lot!!

We removed lower display case doors, sliding side glass doors, and unbolted/unscrewed top before the section arrived.  When the movers got there, they helped us pull the end glass out of the frame.

Surprisingly, the section fit well with even a few inches left over.  The "T" shaped layout has a slightly angle bottom of T which might have over lapped the closest right corner in photo.  But we even scooted the whole shebang over a bit to the right!

Sometimes you can get more help than you need and things get slowed down.  . .

Just kidding.  The layout is designed to attract attention and get folks interested in what was "high tech" formerly.

Finished display is outstanding, but operations still have a bug or two to work out.  Street lights and building lighting came right up.  But, there's a bug in the controls for the railroad -- something is generating a short.  Troubleshooting and wire chasing to come.